<avr/pgmspace.h>: Program Space Utilities

Defines
#define	PROGMEM   __ATTR_PROGMEM__
#define	PSTR(s)   ((const PROGMEM char *)(s))
#define	pgm_read_byte_near(address_short)   __LPM((uint16_t)(address_short))
#define	pgm_read_word_near(address_short)   __LPM_word((uint16_t)(address_short))
#define	pgm_read_dword_near(address_short)   __LPM_dword((uint16_t)(address_short))
#define	pgm_read_float_near(address_short)   __LPM_float((uint16_t)(address_short))
#define	pgm_read_byte_far(address_long)   __ELPM((uint32_t)(address_long))
#define	pgm_read_word_far(address_long)   __ELPM_word((uint32_t)(address_long))
#define	pgm_read_dword_far(address_long)   __ELPM_dword((uint32_t)(address_long))
#define	pgm_read_float_far(address_long)   __ELPM_float((uint32_t)(address_long))
#define	pgm_read_byte(address_short)   pgm_read_byte_near(address_short)
#define	pgm_read_word(address_short)   pgm_read_word_near(address_short)
#define	pgm_read_dword(address_short)   pgm_read_dword_near(address_short)
#define	pgm_read_float(address_short)   pgm_read_float_near(address_short)
#define	PGM_P   const prog_char *
#define	PGM_VOID_P   const prog_void *
Typedefs
typedef void PROGMEM	prog_void
typedef char PROGMEM	prog_char
typedef unsigned char PROGMEM	prog_uchar
typedef int8_t PROGMEM	prog_int8_t
typedef uint8_t PROGMEM	prog_uint8_t
typedef int16_t PROGMEM	prog_int16_t
typedef uint16_t PROGMEM	prog_uint16_t
typedef int32_t PROGMEM	prog_int32_t
typedef uint32_t PROGMEM	prog_uint32_t
typedef int64_t PROGMEM	prog_int64_t
typedef uint64_t PROGMEM	prog_uint64_t
Functions
PGM_VOID_P	memchr_P (PGM_VOID_P, int __val, size_t __len)
int	memcmp_P (const void *, PGM_VOID_P, size_t) __ATTR_PURE__
void *	memcpy_P (void *, PGM_VOID_P, size_t)
PGM_VOID_P	memrchr_P (PGM_VOID_P, int __val, size_t __len)
int	strcasecmp_P (const char *, PGM_P) __ATTR_PURE__
char *	strcat_P (char *, PGM_P)
PGM_P	strchr_P (PGM_P, int __val)
PGM_P	strchrnul_P (PGM_P, int __val)
int	strcmp_P (const char *, PGM_P) __ATTR_PURE__
char *	strcpy_P (char *, PGM_P)
size_t	strcspn_P (const char *__s, PGM_P __reject) __ATTR_PURE__
size_t	strlcat_P (char *, PGM_P, size_t)
size_t	strlcpy_P (char *, PGM_P, size_t)
size_t	strlen_P (PGM_P)
int	strncasecmp_P (const char *, PGM_P, size_t) __ATTR_PURE__
char *	strncat_P (char *, PGM_P, size_t)
int	strncmp_P (const char *, PGM_P, size_t) __ATTR_PURE__
char *	strncpy_P (char *, PGM_P, size_t)
size_t	strnlen_P (PGM_P, size_t)
char *	strpbrk_P (const char *__s, PGM_P __accept) __ATTR_PURE__
PGM_P	strrchr_P (PGM_P, int __val)
char *	strsep_P (char **__sp, PGM_P __delim)
size_t	strspn_P (const char *__s, PGM_P __accept) __ATTR_PURE__
char *	strstr_P (const char *, PGM_P) __ATTR_PURE__
void *	memmem_P (const void *, size_t, PGM_VOID_P, size_t) __ATTR_PURE__
char *	strcasestr_P (const char *, PGM_P) __ATTR_PURE__

---

Detailed Description

    #include <avr/io.h>
    #include <avr/pgmspace.h>

The functions in this module provide interfaces for a program to access data stored in program space (flash memory) of the device. In order to use these functions, the target device must support either the LPM or ELPM instructions.

Note:

These functions are an attempt to provide some compatibility with header files that come with IAR C, to make porting applications between different compilers easier. This is not 100% compatibility though (GCC does not have full support for multiple address spaces yet).

If you are working with strings which are completely based in ram, use the standard string functions described in <string.h>: Strings.

If possible, put your constant tables in the lower 64 KB and use pgm_read_byte_near() or pgm_read_word_near() instead of pgm_read_byte_far() or pgm_read_word_far() since it is more efficient that way, and you can still use the upper 64K for executable code. All functions that are suffixed with a _P require their arguments to be in the lower 64 KB of the flash ROM, as they do not use ELPM instructions. This is normally not a big concern as the linker setup arranges any program space constants declared using the macros from this header file so they are placed right after the interrupt vectors, and in front of any executable code. However, it can become a problem if there are too many of these constants, or for bootloaders on devices with more than 64 KB of ROM. All these functions will not work in that situation.

---

Define Documentation

#define PGM_P   const prog_char *

Used to declare a variable that is a pointer to a string in program space.

#define pgm_read_byte

(

address_short

)

pgm_read_byte_near(address_short)

Read a byte from the program space with a 16-bit (near) address.

Note:

The address is a byte address. The address is in the program space.

#define pgm_read_byte_far

(

address_long

)

__ELPM((uint32_t)(address_long))

Read a byte from the program space with a 32-bit (far) address.

Note:

The address is a byte address. The address is in the program space.

#define pgm_read_byte_near

(

address_short

)

__LPM((uint16_t)(address_short))

Read a byte from the program space with a 16-bit (near) address.

Note:

The address is a byte address. The address is in the program space.

#define pgm_read_dword

(

address_short

)

pgm_read_dword_near(address_short)

Read a double word from the program space with a 16-bit (near) address.

Note:

The address is a byte address. The address is in the program space.

#define pgm_read_dword_far

(

address_long

)

__ELPM_dword((uint32_t)(address_long))

Read a double word from the program space with a 32-bit (far) address.

Note:

The address is a byte address. The address is in the program space.

#define pgm_read_dword_near

(

address_short

)

__LPM_dword((uint16_t)(address_short))

Read a double word from the program space with a 16-bit (near) address.

Note:

The address is a byte address. The address is in the program space.

#define pgm_read_float

(

address_short

)

pgm_read_float_near(address_short)

Read a float from the program space with a 16-bit (near) address.

Note:

The address is a byte address. The address is in the program space.

#define pgm_read_float_far

(

address_long

)

__ELPM_float((uint32_t)(address_long))

Read a float from the program space with a 32-bit (far) address.

Note:

The address is a byte address. The address is in the program space.

#define pgm_read_float_near

(

address_short

)

__LPM_float((uint16_t)(address_short))

Read a float from the program space with a 16-bit (near) address.

Note:

The address is a byte address. The address is in the program space.

#define pgm_read_word

(

address_short

)

pgm_read_word_near(address_short)

Read a word from the program space with a 16-bit (near) address.

Note:

The address is a byte address. The address is in the program space.

#define pgm_read_word_far

(

address_long

)

__ELPM_word((uint32_t)(address_long))

Read a word from the program space with a 32-bit (far) address.

Note:

The address is a byte address. The address is in the program space.

#define pgm_read_word_near

(

address_short

)

__LPM_word((uint16_t)(address_short))

Read a word from the program space with a 16-bit (near) address.

Note:

The address is a byte address. The address is in the program space.

#define PGM_VOID_P   const prog_void *

Used to declare a generic pointer to an object in program space.

#define PROGMEM   __ATTR_PROGMEM__

Attribute to use in order to declare an object being located in flash ROM.

#define PSTR

(

s

)

((const PROGMEM char *)(s))

Used to declare a static pointer to a string in program space.

---

Typedef Documentation

prog_char

Type of a "char" object located in flash ROM.

prog_int16_t

Type of an "int16_t" object located in flash ROM.

prog_int32_t

Type of an "int32_t" object located in flash ROM.

prog_int64_t

Type of an "int64_t" object located in flash ROM.

Note:

This type is not available when the compiler option -mint8 is in effect.

prog_int8_t

Type of an "int8_t" object located in flash ROM.

prog_uchar

Type of an "unsigned char" object located in flash ROM.

prog_uint16_t

Type of an "uint16_t" object located in flash ROM.

prog_uint32_t

Type of an "uint32_t" object located in flash ROM.

prog_uint64_t

Type of an "uint64_t" object located in flash ROM.

Note:

This type is not available when the compiler option -mint8 is in effect.

prog_uint8_t

Type of an "uint8_t" object located in flash ROM.

prog_void

Type of a "void" object located in flash ROM. Does not make much sense by itself, but can be used to declare a "void *" object in flash ROM.

---

Function Documentation

PGM_VOID_P memchr_P	(	PGM_VOID_P	s,
		int	val,
		size_t	len
	)

Scan flash memory for a character.

The memchr_P() function scans the first len bytes of the flash memory area pointed to by s for the character val. The first byte to match val (interpreted as an unsigned character) stops the operation.

Returns:

The memchr_P() function returns a pointer to the matching byte or NULL if the character does not occur in the given memory area.

int memcmp_P	(	const void *	s1,
		PGM_VOID_P	s2,
		size_t	len
	)

Compare memory areas.

The memcmp_P() function compares the first len bytes of the memory areas s1 and flash s2. The comparision is performed using unsigned char operations.

Returns:

The memcmp_P() function returns an integer less than, equal to, or greater than zero if the first len bytes of s1 is found, respectively, to be less than, to match, or be greater than the first len bytes of s2.

void * memcpy_P	(	void *	dest,
		PGM_VOID_P	src,
		size_t	n
	)

The memcpy_P() function is similar to memcpy(), except the src string resides in program space.

Returns:

The memcpy_P() function returns a pointer to dest.

void * memmem_P	(	const void *	s1,
		size_t	len1,
		PGM_VOID_P	s2,
		size_t	len2
	)

The memmem_P() function is similar to memmem() except that s2 is pointer to a string in program space.

PGM_VOID_P memrchr_P	(	PGM_VOID_P	src,
		int	val,
		size_t	len
	)

The memrchr_P() function is like the memchr_P() function, except that it searches backwards from the end of the len bytes pointed to by src instead of forwards from the front. (Glibc, GNU extension.)

Returns:

The memrchr_P() function returns a pointer to the matching byte or NULL if the character does not occur in the given memory area.

int strcasecmp_P	(	const char *	s1,
		PGM_P	s2
	)

Compare two strings ignoring case.

The strcasecmp_P() function compares the two strings s1 and s2, ignoring the case of the characters.

Parameters:

	s1	A pointer to a string in the devices SRAM.
	s2	A pointer to a string in the devices Flash.

Returns:

The strcasecmp_P() function returns an integer less than, equal to, or greater than zero if s1 is found, respectively, to be less than, to match, or be greater than s2. A consequence of the ordering used by strcasecmp_P() is that if s1 is an initial substring of s2, then s1 is considered to be "less than" s2.

char * strcasestr_P	(	const char *	s1,
		PGM_P	s2
	)

This funtion is similar to strcasestr() except that s2 is pointer to a string in program space.

char * strcat_P	(	char *	dest,
		PGM_P	src
	)

The strcat_P() function is similar to strcat() except that the src string must be located in program space (flash).

Returns:

The strcat() function returns a pointer to the resulting string dest.

PGM_P strchr_P	(	PGM_P	s,
		int	val
	)

Locate character in program space string.

The strchr_P() function locates the first occurrence of val (converted to a char) in the string pointed to by s in program space. The terminating null character is considered to be part of the string.

The strchr_P() function is similar to strchr() except that s is pointer to a string in program space.

Returns:

The strchr_P() function returns a pointer to the matched character or NULL if the character is not found.

PGM_P strchrnul_P	(	PGM_P	s,
		int	c
	)

The strchrnul_P() function is like strchr_P() except that if c is not found in s, then it returns a pointer to the null byte at the end of s, rather than NULL. (Glibc, GNU extension.)

Returns:

The strchrnul_P() function returns a pointer to the matched character, or a pointer to the null byte at the end of s (i.e., s+strlen(s)) if the character is not found.

int strcmp_P	(	const char *	s1,
		PGM_P	s2
	)

The strcmp_P() function is similar to strcmp() except that s2 is pointer to a string in program space.

Returns:

The strcmp_P() function returns an integer less than, equal to, or greater than zero if s1 is found, respectively, to be less than, to match, or be greater than s2. A consequence of the ordering used by strcmp_P() is that if s1 is an initial substring of s2, then s1 is considered to be "less than" s2.

char * strcpy_P	(	char *	dest,
		PGM_P	src
	)

The strcpy_P() function is similar to strcpy() except that src is a pointer to a string in program space.

Returns:

The strcpy_P() function returns a pointer to the destination string dest.

size_t strcspn_P	(	const char *	s,
		PGM_P	reject
	)

The strcspn_P() function calculates the length of the initial segment of s which consists entirely of characters not in reject. This function is similar to strcspn() except that reject is a pointer to a string in program space.

Returns:

The strcspn_P() function returns the number of characters in the initial segment of s which are not in the string reject. The terminating zero is not considered as a part of string.

size_t strlcat_P	(	char *	dst,
		PGM_P	,
		size_t	siz
	)

Concatenate two strings.

The strlcat_P() function is similar to strlcat(), except that the src string must be located in program space (flash).

Appends src to string dst of size siz (unlike strncat(), siz is the full size of dst, not space left). At most siz-1 characters will be copied. Always NULL terminates (unless siz <= strlen(dst)).

Returns:

The strlcat_P() function returns strlen(src) + MIN(siz, strlen(initial dst)). If retval >= siz, truncation occurred.

size_t strlcpy_P	(	char *	dst,
		PGM_P	,
		size_t	siz
	)

Copy a string from progmem to RAM.

Copy src to string dst of size siz. At most siz-1 characters will be copied. Always NULL terminates (unless siz == 0).

Returns:

The strlcpy_P() function returns strlen(src). If retval >= siz, truncation occurred.

size_t strlen_P

(

PGM_P

src

)

The strlen_P() function is similar to strlen(), except that src is a pointer to a string in program space.

Returns:

The strlen() function returns the number of characters in src.

int strncasecmp_P	(	const char *	s1,
		PGM_P	s2,
		size_t	n
	)

Compare two strings ignoring case.

The strncasecmp_P() function is similar to strcasecmp_P(), except it only compares the first n characters of s1.

Parameters:

	s1	A pointer to a string in the devices SRAM.
	s2	A pointer to a string in the devices Flash.
	n	The maximum number of bytes to compare.

Returns:

The strncasecmp_P() function returns an integer less than, equal to, or greater than zero if s1 (or the first n bytes thereof) is found, respectively, to be less than, to match, or be greater than s2. A consequence of the ordering used by strncasecmp_P() is that if s1 is an initial substring of s2, then s1 is considered to be "less than" s2.

char * strncat_P	(	char *	dest,
		PGM_P	src,
		size_t	len
	)

Concatenate two strings.

The strncat_P() function is similar to strncat(), except that the src string must be located in program space (flash).

Returns:

The strncat_P() function returns a pointer to the resulting string dest.

int strncmp_P	(	const char *	s1,
		PGM_P	s2,
		size_t	n
	)

The strncmp_P() function is similar to strcmp_P() except it only compares the first (at most) n characters of s1 and s2.

Returns:

The strncmp_P() function returns an integer less than, equal to, or greater than zero if s1 (or the first n bytes thereof) is found, respectively, to be less than, to match, or be greater than s2.

char * strncpy_P	(	char *	dest,
		PGM_P	src,
		size_t	n
	)

The strncpy_P() function is similar to strcpy_P() except that not more than n bytes of src are copied. Thus, if there is no null byte among the first n bytes of src, the result will not be null-terminated.

In the case where the length of src is less than that of n, the remainder of dest will be padded with nulls.

Returns:

The strncpy_P() function returns a pointer to the destination string dest.

size_t strnlen_P	(	PGM_P	src,
		size_t	len
	)

Determine the length of a fixed-size string.

The strnlen_P() function is similar to strnlen(), except that src is a pointer to a string in program space.

Returns:

The strnlen_P function returns strlen_P(src), if that is less than len, or len if there is no '\0' character among the first len characters pointed to by src.

char * strpbrk_P	(	const char *	s,
		PGM_P	accept
	)

The strpbrk_P() function locates the first occurrence in the string s of any of the characters in the flash string accept. This function is similar to strpbrk() except that accept is a pointer to a string in program space.

Returns:

The strpbrk_P() function returns a pointer to the character in s that matches one of the characters in accept, or NULL if no such character is found. The terminating zero is not considered as a part of string: if one or both args are empty, the result will NULL.

PGM_P strrchr_P	(	PGM_P	s,
		int	val
	)

Locate character in string.

The strrchr_P() function returns a pointer to the last occurrence of the character val in the flash string s.

Returns:

The strrchr_P() function returns a pointer to the matched character or NULL if the character is not found.

char * strsep_P	(	char **	sp,
		PGM_P	delim
	)

Parse a string into tokens.

The strsep_P() function locates, in the string referenced by *sp, the first occurrence of any character in the string delim (or the terminating '\0' character) and replaces it with a '\0'. The location of the next character after the delimiter character (or NULL, if the end of the string was reached) is stored in *sp. An ``empty'' field, i.e. one caused by two adjacent delimiter characters, can be detected by comparing the location referenced by the pointer returned in *sp to '\0'. This function is similar to strsep() except that delim is a pointer to a string in program space.

Returns:

The strsep_P() function returns a pointer to the original value of *sp. If *sp is initially NULL, strsep_P() returns NULL.

size_t strspn_P	(	const char *	s,
		PGM_P	accept
	)

The strspn_P() function calculates the length of the initial segment of s which consists entirely of characters in accept. This function is similar to strspn() except that accept is a pointer to a string in program space.

Returns:

The strspn_P() function returns the number of characters in the initial segment of s which consist only of characters from accept. The terminating zero is not considered as a part of string.

char * strstr_P	(	const char *	s1,
		PGM_P	s2
	)

Locate a substring.

The strstr_P() function finds the first occurrence of the substring s2 in the string s1. The terminating '\0' characters are not compared. The strstr_P() function is similar to strstr() except that s2 is pointer to a string in program space.

Returns:

The strstr_P() function returns a pointer to the beginning of the substring, or NULL if the substring is not found. If s2 points to a string of zero length, the function returns s1.